Silver mining process equipment

Silver mining process equipment

Silver mining process equipment introduction

This gadget is appropriate for sorting grain size 0.three - 0.02 mm fines iron ore, ilmenite, chromite, pyrite, zircon, rutile, monazite, phosphorous ore, tungsten ore, tin, ore of tantalum, niobium ore, as well as variations during the proportion of other non-ferrous metals, rare metals and non-metallic mineral body . This equipment has the sorting process is stable, easy to manage, to allow modifications on the mineral concentration range, enrichment is higher, and higher recovery charge, small footprint, water consumption.

Spiral chute erected, calibration in the vertical line, metal frame or wood fixed during the correct position by the sand pump ore sent to the spiral feed inlet with the prime two, add supplementary water, adjust the concentration of ore oar ore oar organic down in the substantial swirl, within a rotating inclined plane velocity to produce a form of inertia, centrifugal force, the proportion of ore particle size, form differences, as a result of the swirl of gravity and centrifugal force to separate ore and sand, fine mine into the concentrate bucket choose out pipe, the tailings flow in to the tailings bucket receiving the pipe sand traps, and after that the sand pump to drain away, finished the whole process of dressing.

Spiral chute operation

The primary parts of the spiral concentrator involve feeder, frame, Spiral Chute and output chute and so on. Spiral concentrator is fixed by a piece of timber or hob in place. The mineral sand is sent by pump towards the two material entrances at the best of spiral. And then operators add sufficient water and accommodate the density of mash, which flows from your best to the bottom normally. A centrifugal force of inertia was developed within the slope inside the velocity of rotation.

According towards the distinctive proportions, granularities, shapes of your mineral sand, mineral sand will likely be divided from the result of gravity and centrifugal force. Concentrated ore flow into ore bucket. Tailings are pumped to the tailing pond wherever a draw-off pump operates. The over will be the entire process of material separation.

spiral chute manufacturer

It is proved that spiral concentrator operates effectively within a coal separating plant. This handy equipment combines with traditional process of slack-coal and coal-slurry. Compared with all the program of water-only cyclone, the investment and operation cost of spiral concentrator is significantly reduced. This spiral chute includes advantages of large capacity, exceptional effectiveness, superior recovery, and dependable operation. Undoubtedly, spiral chute is best equipment for investing in mining business. zenith company like a qualified manufacturer of mining equipment and beneficiation equipment such as spiral chute, is very well spoked by its customers.

If you decide on a spiral concentrator, you'll be able to conserve significantly budget for the factory buildings, and have to have not worry about the substantial expense on heating or ventilation.